Welding

No one stocks more of the premier brands of welding equipment than us. Just visit one of our stores and you’ll find a variety of welding machines for any application. Whether you’re working on a weekend project or need a fleet of welders for your company, we’ve got the machine for you—and chances are it’s in stock. From premier brands such as Miller and Lincoln and any process from MIG and TIG to portable, we can get you the tools you need to get the job done!

Brands You Trust

Minneapolis Oxygen carries the highest quality welding machines and accessories (and gases) from the leading manufacturers—including ESAB, Lincoln and Miller—in the industry:

  • Welding machines
  • Guns & Torches
  • Consumables
  • Cables

While supplying the industry’s leading welding machines and accessories, Minneapolis Oxygen also assists with machine set up, training and technical support, to ensure our customers’ needs are continually met. For more information on welding equipment and supplies, visit one of our many locations or talk to our experts at 800-236-3902.

When choosing a welder, it is important to understand the basic welding processes and their uses. The four basic welding processes are listed below.

MIG Welding

MIG Welding, also known as Gas Metal Arc Welding (GMAW), is a process developed in the 1940’s that is considered semi-automatic and requires electricity to produce heat, an electrode to fill the joint and a shielding gas to protect the weld from the air. A MIG welder utilizes a constant DC current while wire and gas are fed continuously through the welding gun and leads as the gun’s trigger is depressed. It is most commonly used in fabrication environments where production needs are high.

Common shielding gases include:
  • Argon
  • Carbon Dioxide
  • 75/25 Mixed Gas
  • Helium

TIG Welding

TIG Welding, also known as Gas Tungsten Arc Welding (GTAW), is a manual welding process that requires the welder to use two hands. One hand holds the TIG torch that produces the arc and the other hand is used to add the filler metal to the weld joint. TIG Welding is the most difficult process to learn but is the most versatile. When done correctly, TIG Welding produces the highest quality weld. It is heavily utilized for critical weld joints, welding metals other than common steel and for where precise, small welds are required.

Common shielding gases include:
  • Argon
  • Helium
  • Ar/He Mix

Stick Welding

Stick Welding, also known as Shielded Metal Arc Welding (SMAW), is a manual process that is often used in high wind outdoor repair situations. It utilizes a power source connected to an electrode holder. Current passes through the leads to the electrode. Shielding gas is not needed for this process because the electrode is covered in flux which protects the arc during a weld.

Flux Cored Welding

Flux Cored Arc Welding (FCAW) is very similar to MIG welding. The main difference is the filler metal is hollow and filled with flux, so a shielding gas is not required for this process. Flux cored welding is often used in high wind outdoor repair situations.